adiabatic cooling的例句大全

The rate of change of δ 18O against temperature in the process of wet adiabatic cooling is smaller than in the process of isobaric cooling under the same humidity.

在相同的湿度条件下，湿绝热冷却过程中δ18O随温度的变化率小于等压冷却过程。

Adiabatic ablation cooling, film cooling are the main means and have been used widely.

隔热层烧蚀冷却、气膜冷却是冲压发动机常用的冷却方式。

Numerical study on adiabatic wall cooling effectiveness and convective heat transfer coefficient of effusion cooling

致密孔阵气膜冷却绝热温比和对流换热系数的数值研究

This paper reports the current studies on the film cooling characteristics of single-row holes on flat plate at different blowing ratios, and analyzes the distributions of adiabatic film cooling effectiveness and heat transfer coefficient downstream the film holes.

对不同吹风比条件下的典型单排孔冷却结构的平板气膜冷却特性进行了实验研究，对冷却孔下游的气膜冷却效率及换热系数分布规律进行了分析。

This expansion takes energy from the air, resulting in temperature reduction, a process known as adiabatic cooling.

此膨胀吸收了空气中的能量，导致空气温度下降，这个过程称为绝热冷却。

Adiabatic cooling, negative vorticity advection and cold advection prevented cyclone development.

绝热冷却、负涡度平流和冷平流对气旋的发展起阻碍作用。

Investigation of adiabatic cooling effectiveness of an effusion cooled plate

致密微孔壁绝热冷却效果研究

Adiabatic film cooling effectiveness downstream of primary jet in combustion chamber

燃烧室主燃孔下游气膜绝热温比研究

The global MWL lies between the two MWLs simulated under wet adiabatic and isobaric cooling processes, respectively.

全球大气水线位于湿绝热冷却过程和等压冷却过程条件下分别模拟的两条大气水线之间。

The limit on thermodynamics for gas cooling is the adiabatic saturation temperatures.

煤气冷却的热力学极限是绝热饱和温度.